Have a cracked or a damaged Asbestos roof? You don’t have to remove it. Here are a few simple tools to fix the Asbestos roof to its original state.

• Crack Repair Tape
• Roof Hole Repair
• Bolt Hole Repairs
• Sealing General Roof Sheet Damage
• Asbestos Single Sheet Replacement
• Refurbish with Special Coating
• Over Cladding
• Repairing Roof Lights

Crack Repair Tape

Crack Repair Tape is an essential tool to stop a crack in an asbestos sheet. The crack repair tape covers the crack in a moment. But the selection of crack repair tapes should be done carefully. This is because most repair tapes are affected by UV light and wear out in cold. Hence, it is advisable to buy rubber tapes.

Roof Hole Repair

Roof hole repairs are excellent when there is an emergency. It minimizes damage in lesser time. However, the product quality matters again since most products wear out in cold.

Bolt-hole Repair

Bolt holes are a major problem in the asbestos roof as it enlarges over time – asbestos removal Perth wa. The washers are bound to corrode with more exposure to UV rays. It can be fixed by replacing the bolt and the washer and sealing it with a tape. The tape quality must be verified again.

Sealing General Roof Sheet Damage

Damaged asbestos sheets are a problem, especially during the monsoon season. The leakage of water makes everybody uncomfortable. Although sealing is the best option, not every product is durable. The damage must be sealed with products that withstand temperature changes and are waterproof.

Asbestos Single Sheet Replacement

Single sheet replacement is the process of replacing the old asbestos sheet with a new one. It is also advisable to use GRP glass-reinforced plastic sheet externally. GRP sheets have a warranty period of more than 50 years and are also waterproof. Hence, it saves the trouble of changing it again and again.

Refurbish with A Specialist Coating

The coating is a powerful waterproof solution. The process of coating takes place in two steps. First, all the loose asbestos fibers and liches are covered and bound with a primer. Then a coating topcoat gives protection against UV, water, and the weather.

Over Cladding

Over-cladding is the process of adding a roof on the top of an asbestos roof. It is considered the best when the sealing or repairs don’t work. It is required to add insulation in order to control the heat.

Repairing Roof Lights

Roof lights are bound to deteriorate which prevents natural light from passing through it as it grows dark. With tape, the light is restricted further and working on roof lights is quite risky. Hence, it is advisable to clean and coat the skylights which results in more light passing through and is much cheaper than new roof light.